1 GENERAL INFORMATION
Safety rules
Read the Operators Manual
CNH America LLC technical manuals
Proposition 65
Product identification 
Note to the Owner
Tractor intended use
Manual storage 
Product identification
Component location 
2 SAFETY INFORMATION
Safety rules
ROPS and CSF
Front-end loader
Hazardous substances
SAFETY DECALS
3 CONTROLS/INSTRUMENTS
ACCESS TO OPERATOR'S PLATFORM
Tractor access
OPERATOR'S SEAT
Overview
Control identification
INSTRUCTOR'S SEAT
Overview 
FORWARD CONTROLS
Steering column
Front console
Pedal controls
RH SIDE CONTROLS
Armrest console
Armrest compartment
Adjusting the armrest console
REARWARD CONTROLS
Fender console
Automatic temperature controls
Automatic temperature control system
Ventilation
OVERHEAD CONTROLS
Lamp controls
EXTERIOR CONTROLS
Rear fender controls
INSTRUMENT CLUSTER
Overview
Gauges
Upper display
Keypad
Status and warning icons
Lower display
Display settings
Operator preferences
Icon legend
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Before starting the engine
STARTING THE UNIT
Normal engine starting
Cold temperature operation
STOPPING THE UNIT
Stopping the engine
MOVING THE UNIT
Powershift transmission
Transmission default gears
Setting default gears
Best practices for prolonged transmission life
Transmission disengages; neutral icon flashes
Automatic productivity management (APM)
Mechanical front drive (MFD)
Differential lock system
Suspended axle
Ride control
Constant engine speed
Electronic end of row system 
5 TRANSPORT OPERATIONS
ROAD TRANSPORT
Tractor warning lamps and SMV symbol
Wide transport marker light
Tractor warning lamps
Safe transport speed
Implement warning lamps and SMV symbol
Safety chain
SHIPPING TRANSPORT
Securing the tractor for shipping
RECOVERY TRANSPORT
Safety rules
Towing the tractor
6 WORKING OPERATIONS
GENERAL INFORMATION
Overview 
REAR PTO
Safety rules
Connecting the PTO
Interchangeable PTO shaft.
Reversible PTO shaft
PTO operation
PTO fender switch operation
Auto PTO operation
THREE POINT HITCH
Identification
Link adjustment
Hitch high clearance adjustment
Hydraulic links
Sway limiter adjustment
Lower link block adjustment
Mechanical float adjustment
Hitch quick coupler - Category III/IIIN
Hitch quick coupler - Category IVN
Hitch operation
Hitch remote switch operation
Position control operation
Load control operation
Slip control operation
Hitch set point
DRAWBARS AND TOWING ATTACHMENTS
Safety rules
Drawbar capacity/position
Adjusting the drawbar
AUXILIARY POWER CONNECTIONS
Auxiliary power and lighting
Cab power connections
HYDRAULIC REMOTE CONTROL VALVES
Valve couplers and connections
Motor return circuit
Power beyond circuit
Overview
Operating the controls
Changing the functional mode
Remote hydraulic auto mode
Auto depth control 
BALLASTING THE TRACTOR
Guidelines
Tire load and inflation charts
Weights, cast metal and liquid
Wheel slip and power hop performance
MECHANICAL FRONT DRIVE (MFD) AXLES
Tire combinations and tread positions
Steering and oscillation stops
Tread and fender settings - standard MFD axles
Tread and fender settings - saddle suspension axles
Tread and fender settings - heavy duty and 3 meter axles
REAR AXLE
Rear wheel installation
Rear wheel tread settings
7 MAINTENANCE
GENERAL INFORMATION
Safety rules
Opening the hood
Battery access and service
Tire and rim service
Tractor jacking points
Capacities
Consumables
Electrical component location
Electrical system specification
Maintenance chart notes
MAINTENANCE CHART
Maintenance Chart
At warning message display
Air filter service icon/message
First 10 to 50 hours
Differential and planetary oil
Wheel bolt torque
Weight bolt torque
Every 10 hours or daily
Engine oil level
Transmission oil level.
Engine coolant level
Engine auxiliary fuel filter
Air reservoir - Drain fluid
Rear hitch and front axle
Every 50 hours
Engine primary fuel filter
Every 300 hours
Battery water level (Note E)
Engine air intake hoses
Engine coolant level - deaeration tank
Engine oil and filter
Wheel bolt torque
Weight bolt torque
Front axle (Note A)
Rear hitch (Note A)
Fuel tank
Differential and planetary oil level (Note B)
Transmission oil pressure oil pressure
Reversible 1000 RPM PTO shaft (Note D)
Every 600 hours
Engine coolant antifreeze protection
Engine coolant filter
Engine coolant hoses and clamps
Engine primary fuel filter
Changeable PTO internal splines
Every 1200 hours or annually
Differential and planetary oil
Engine air filters
Engine air precleaner.
Every 1500 hours
Transmission oil
Transmission oil filter
Regulated transmission filter
Every 2100 hours
Engine coolant
Fuel injector nozzles (Note C)
Engine valve adjustment (Note C)
Every 3000 hours
Engine vibration damper (Note C)
As required
Vehicle fire prevention
Cab air filter
Engine primary air filter
Grille screen and radiator area
Fuel tank vent filter
Transmission clutch and accumulator
Tire pressure
Fan belt
Spark arresting muffler
Remote valve collection bottle
Engine auxiliary fuel filter
Cab fabric and carpet.
Seat belt
STORAGE
Tractor storage
Removal from storage
ELECTRICAL SYSTEM
Radio or audio system
Battery removal and installation
Auxiliary battery connections
Head light - Replace
Flood and work light
Fender tail light and warning light
Roof front warning and work light
Roof rear warning light
High intensity work light
Wide transport marker light.
Rotating beacon light
Interior light- Replace
8 TROUBLESHOOTING
ALARM(S)
Display warnings
9 SPECIFICATIONS
ENGINE - General specification
POWER TRAIN - General specification
TRAVELLING - Speeds
Vehicle dimensions and shipping weight
Maximum operating weight
10 ACCESSORIES
Front wheel fenders 
Farming system displays
Chemical tank mounting
Loader connection and operation
Trailer brake connections
General accessories

========================================