John deere 135C RTS & 225C LC RTS Excavator Official Operator's Manual

The Best  PDF Manuals Online Includes : Bookmarks + Searchable Text + Index = Fast Navigation And Best Organization ! 

This manual contains information and data to this model. Has specs, diagrams, and actual real photo illustrations, These technical manual is as good as it gets for Diagnosing, Repairing, and Maintenancing John Deere machinery. In addition to space savings, nice thing about having PDF files instead of a hard-printed manual is that you can use the Search feature in Acrobat to find just what your looking for and just print out the exact pages you need... or all manual. 

Models And Serial :

All Years & Serials Coverd 

CONTENTS : 

Safety—Safety Features
Safety Features .................................................1-1-1
Safety—General Precautions
Recognize Safety Information ...........................1-2-1
Follow Safety Instructions..................................1-2-1
Operate Only If Qualified ...................................1-2-1
Wear Protective Equipment...............................1-2-1
Avoid Unauthorized Machine Modifications.......1-2-2
Add Cab Guarding for Special Uses..................1-2-2
Inspect Machine ................................................1-2-2
Stay Clear of Moving Parts................................1-2-2
Avoid High-Pressure Fluids ...............................1-2-3
Avoid High-Pressure Oils ..................................1-2-3
Beware of Exhaust Fumes ................................1-2-4
Prevent Fires .....................................................1-2-4
Prevent Battery Explosions ...............................1-2-4
Handle Chemical Products Safely .....................1-2-5
Dispose of Waste Properly ................................1-2-5
Prepare for Emergencies...................................1-2-5
Safety—Operating Precautions
Use Steps and Handholds Correctly .................1-3-1
Start Only From Operator's Seat .......................1-3-1
Use and Maintain Seat Belt ...............................1-3-1
Prevent Unintended Machine Movement ..........1-3-1
Avoid Worksite Hazards ....................................1-3-2
Keep Riders Off Machine ..................................1-3-2
Avoid Backover Accidents .................................1-3-3
Avoid Machine Tip Over ....................................1-3-3
Use Special Care When Lifting Objects ............1-3-3
Add and Operate Attachments Safely ...............1-3-4
Safety—Maintenance Precautions
Park and Prepare for Service Safely .................1-4-1
Service Cooling System Safely .........................1-4-1
Remove Paint Before Welding or Heating.........1-4-2
Make Welding Repairs Safely ...........................1-4-2
Drive Metal Pins Safely .....................................1-4-2
Safety—Safety Signs
Safety Signs ......................................................1-5-1
Safety Signs Installed in
Cab—Hydraulic Coupler—If Equipped..........1-5-3
Safety Signs Installed on Hydraulic
Coupler—If Equipped....................................1-5-4
Operation—Operator's Station
Pedals, Levers, and Panels...............................2-1-1
Monitor Panel ....................................................2-1-2
Monitor Panel Functions....................................2-1-3
Front Switch Panel ............................................2-1-4
Front Switch Panel Functions............................2-1-5
Rear Switch Panel .............................................2-1-5
Horn...................................................................2-1-6
Power Boost Switch—225C LC RTS.................2-1-6
Pilot Control Shutoff Lever.................................2-1-7
Travel Alarm and Travel Alarm Cancel Switch ..2-1-7
Cab Heater and Air Conditioner ........................2-1-8
Operating AM/FM Radio....................................2-1-9
Secondary Exit Tool...........................................2-1-9
Opening Upper Front (Secondary Exit)
Window .........................................................2-1-9
Removing and Storing Lower Front Window ...2-1-10
Opening Side Window .....................................2-1-11
Opening and Closing Roof Exit Cover.............2-1-11
Adjusting Operator Seat ..................................2-1-12
Adjusting Console Height ................................2-1-12
Adjusting Console Fore-Aft..............................2-1-13
Operation—Operating the Machine
Before Starting Work .........................................2-2-1
Operator's Daily Machine Check
Before Starting ..............................................2-2-1
Starting Engine ..................................................2-2-2
Cold Weather Starting .......................................2-2-3
Cold Weather Warm-Up ....................................2-2-3
Travel Pedals and Levers..................................2-2-4
Locking the Hydraulic Coupler to the
Attachment ....................................................2-2-5
Unlocking the Hydraulic Coupler From
the Attachment ..............................................2-2-6
Control Lever Pattern Operation........................2-2-7
Control Lever Pattern Conversion .....................2-2-8
Operating Backfill Blade—135C RTS................2-2-9
Operating Tips—Backfill Blade..........................2-2-9
Operating In Water and Mud .............................2-2-9
Driving Up a Steep or Slippery Slope ................2-2-9
Lifting ...............................................................2-2-10
Lower Boom With Engine
Stopped—135C RTS ..................................2-2-11
Lower Boom With Engine
Stopped—225C LC RTS.............................2-2-13
Parking Machine..............................................2-2-14
Transporting Machine Equipped With
Long Arm—135C RTS ................................2-2-14
Loading and Unloading for Transport ..............2-2-15
Towing Machine...............................................2-2-16
Lifting the Machine ..........................................2-2-16
Maintenance—Machine
Diesel Fuel.........................................................3-1-1
Testing Diesel Fuel ............................................3-1-1
Handling and Storing Diesel Fuel ......................3-1-2
Alternative and Synthetic Lubricants .................3-1-2
Diesel Engine Oil ...............................................3-1-3
Hydraulic Oil ......................................................3-1-4
Swing Gearbox and Travel Gearbox Oils ..........3-1-5
Pump Gearbox Oil .............................................3-1-5
Track Adjuster, Working Tool Pivot,
Swing Bearing, and Swing Bearing
Gear Grease .................................................3-1-6
Maintenance—Periodic Maintenance
Service Machine at Specified Intervals..............3-2-1
Check Hour Meter Regularly .............................3-2-1
Prepare Machine for Maintenance ....................3-2-1
Open Access Cover—135C RTS ......................3-2-1
Open Engine Hood—135C RTS........................3-2-2
Open Access Cover—225C LC RTS.................3-2-2
Open Engine Hood—225C LC RTS ..................3-2-2
Fuel Tank ...........................................................3-2-2
Hydraulic Breaker and Crusher Attachments ....3-2-3
Maintenance and Repair Record
Keeping System ............................................3-2-3
Fluid Analysis Program Test Kits and
3-Way Coolant Test Kit..................................3-2-4
Periodic Maintenance Record Keeping
System ..........................................................3-2-5
Maintenance—As Required
Drain Fuel Tank Sump .......................................3-3-1
Clean Air Cleaner Dust Valve ............................3-3-2
Check Windshield Washer Fluid Level ..............3-3-2
Maintenance—Every 10 Hours or Daily
Check Hydraulic Oil Tank Level.........................3-4-1
Check Engine Oil Level .....................................3-4-3
Check Recovery Tank Coolant Level.................3-4-4
Lubricate Hydraulic Coupler—If Equipped ........3-4-5
Maintenance—Initial Service - 50 Hours
Drain Water Separator.......................................3-5-1
Bleed Fuel System—135C RTS ........................3-5-1
Bleed Fuel System—225C LC RTS ..................3-5-2
Check and Adjust Track Sag .............................3-5-2
Maintenance—Every 100 Hours
Grease Front Joint Pins—135C RTS ................3-6-1
Grease Front Joint Pins—225C LC RTS...........3-6-2
Grease Bucket and Link Pins—135C RTS........3-6-2
Grease Bucket and Link Pins—225C
LC RTS .........................................................3-6-3
Fan Belt
Adjust Tension...............................................3-6-3
Maintenance—Every 250 Hours
Grease Backfill Blade ........................................3-7-1
Check Swing Gearbox Oil Level........................3-7-1
Drain Hydraulic Fluid Tank Sump ......................3-7-2
Check Pump Drive Gearbox Oil
Level—225C LC RTS....................................3-7-3
Clean Battery Terminals ....................................3-7-3
Clean or Replace Primary Air Cleaner
Element .........................................................3-7-4
Maintenance—Every 500 Hours
Grease Swing Bearing Gear..............................3-8-1
Drain Water Separator.......................................3-8-2
Replace Fuel Filter ............................................3-8-2
Change Engine Oil and Replace Filter ..............3-8-3
Check Air Intake Hose.......................................3-8-4
Clean Radiator Air Inlet Screen .........................3-8-5
Check Cab Fresh Air Filter ................................3-8-5
Check Cab Recirculating Air Filter.....................3-8-6
Grease Swing Bearing.......................................3-8-6
Maintenance—Every 1000 Hours
Change Swing Gearbox Oil ...............................3-9-1
Clean Fuel Tank Inlet Screen ............................3-9-1
Replace Hydraulic Tank Oil Filter ......................3-9-2
Replace Pilot System Oil Filter ..........................3-9-4
Change Pump Drive Gearbox
Oil—225C LC RTS........................................3-9-4
Clean Engine Crankcase Ventilation Tube ........3-9-5
Adjust Engine Valve Clearance .........................3-9-5
Engine Speed ....................................................3-9-5
Engine Speed Adjustment .................................3-9-6
Replace Air Cleaner Elements ..........................3-9-6
Maintenance—Every 2000 Hours
Drain Cooling System......................................3-10-1
Cooling System Fill and Deaeration
Procedure....................................................3-10-2
Change Travel Gearbox Oil.............................3-10-2
Maintenance—Every 4000 Hours
Change Hydraulic Tank Oil and Clean
Suction Screen—135C RTS .......................3-11-1
Change Hydraulic Tank Oil and Clean
Suction Screen—225C LC RTS..................3-11-3
Miscellaneous—Machine
Do Not Service or Adjust Injection
Nozzles or High Pressure Fuel Pump ...........4-1-1
Do Not Service Control Valves,
Cylinders, Pumps, or Motors.........................4-1-1
Precautions for Alternator and Regulator ..........4-1-1
Using Booster Batteries—24-Volt System .........4-1-1
Using Battery Charger .......................................4-1-2
Replacing Batteries ...........................................4-1-2
Welding On Machine .........................................4-1-2
Clean Machine Regularly ..................................4-1-3
Adding 12-Volt Accessories...............................4-1-3
Replacing Fuses................................................4-1-4
Replacing Bucket Teeth.....................................4-1-4
Replacing Bucket Tooth
Tip—Heavy-Duty Bucket ...............................4-1-6
Adjusting Bucket to Arm Joint............................4-1-6
Removing Bucket ..............................................4-1-7
Track Sag General Information .........................4-1-7
Check Track Shoe Hardware ............................4-1-8
Unified Inch Bolt and Screw Torque Values.......4-1-9
Metric Bolt and Screw Torque Values..............4-1-10
Miscellaneous—Operational Checkout
Operational Checkout........................................4-2-1
Miscellaneous—Troubleshooting
Using Troubleshooting Charts ...........................4-3-1
Engine ...............................................................4-3-2
Electrical System ...............................................4-3-5
Hydraulic System...............................................4-3-7
Miscellaneous—Storage
Prepare Machine for Storage ............................4-4-1
Miscellaneous—Serial Numbers
Record Product Identification Number (PIN) .....4-5-1
Record Engine Serial Number...........................4-5-1
Record Travel Motor Serial Numbers ................4-5-1
Record Swing Motor Serial Number ..................4-5-2
Hydraulic Coupler Serial Number—If
Equipped .......................................................4-5-2
Keep Proof of Ownership ..................................4-5-2
Keep Machines Secure .....................................4-5-3
Miscellaneous—Specifications
135C RTS Engine Specifications ......................4-6-1
135C RTS Drain and Refill Capacities ..............4-6-1
135C RTS Specifications...................................4-6-2
135C RTS Working Ranges ..............................4-6-4
135C RTS Lift Capacity—KG
(LB)(without blade and with rubber track) .....4-6-5
135C RTS Lift Capacity—KG
(LB)(blade on the ground and with
rubber track)..................................................4-6-6
135C RTS Lift Capacity—KG
(LB)(without blade and with rubber track) .....4-6-7

======================================== 
File Format: PDF 
Compatible: All Versions of Windows & Mac 
Language: English 
Requirements: Adobe PDF Reader & WinZip